Swingline Stack-and-Shred 750X Manual de instrucciones Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
8
Maintenance
The rollers on the auto-feed mechanism may become dirty over
time, please wipe clean with a dry cloth to maintain maximum
product performance (see g 10).
The auto-start infra-red sensor, located in the paper feed
entry-slot, can occasionally become covered in paper-dust
causing the shredder to run despite no paper being fed into
the machine. Switch the shredder off at the rear of the
machine and carefully clean the sensor using a cotton-swab
(see g 11).
Self-Cleaning Cutters
After emptying and replacing a full bin, the shredder will run
in forward for 4 seconds, stop for 2 seconds and then reverse
for 4 seconds to clear away any remaining paper from the
cutter mechanism. This unique ‘self-cleaning’ mechanism is
additional jam prevention technology from Swingline.
Service
We recommend these machines are serviced every 6 to 12
months by a Swingline service engineer – see back of this
booklet for the contact details of your local service center and
for enquiries about maintenance contracts.
Credit Card Shredding
The Stack-and-Shred 750X can shred credit cards. Switch the
shredder to auto mode, then;
1 Lift up the paper loading door (see g 5).
2 Insert the credit card into the roller as shown in g 8. Only
shred one credit card at a time.
3 Close the paper loading door (see g 2).
Comb Bind Removal Hooks
Note – Use only on standard comb bind strips.
1 Open bin door.
2 Place document onto the comb bind hooks (see g 9).
3 Pull down on the document to remove comb strip.
Swingline encourages customers to recycle shredded
paper. Please note that shredded paper cannot be
recycled if mixed with credit card shards. If recycling,
please separate shredded paper and credit cards.
Shredder Accessories
We recommend that a paper waste bag for recycling shredded
paper is used on all models.
Accessory Part Number Box Qty
Recycling Waste Bag 1765032 50 bags
Plastic Waste Bag 40060 100 bags
Oil* Rell Bottle 1760049 8
Bin Full
The shredder will not function when the bin is full and the bin
full symbol (
) is illuminated. You should empty the bin.
Open the door and pat down the paper chips, then slide out
the waste sack support frame.
• Carefully remove the waste bag from the frame.
* ACCO Brands accepts no liability for product performance or safety
when other types or brands of lubricants are used on any part(s) of
this machine.
TM/MC
Vista de pagina 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comentarios a estos manuales

Sin comentarios